Drivers Sound Id Input Devices

Drivers Sound Id Input Devices Online
Drivers Sound Id Input Devices
Drivers Sound Id Input Devices Device
Drivers Sound Id Input Devices Download
Drivers Sound Id Input Devices Using

-->

This package contains the Realtek High Definition Audio driver. Audio driver is the software that helps your operating system to communicate with audio devices such as sound cards and speakers. This update enhances the driver compatibility with Windows 10 Creators Update. This setting is normally found in an Audio Settings or Preferences menu. Download the iD Drivers. Head to our website for the latest version of our iD Windows Installer: audient.com/id4-downloads. Using the USB cable provided, connect iD4 to your computer’s USB port. Run iD Driver Setup. Go to Start, and then select Settings System Sound Sound control panel. Do either or both of the following: Select the Playback tab, select the device you want to use for communications playback (for example, the built-in speakers on your Surface, external speakers, or a headset), and then select Set Default Communication Device.

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Drivers Sound Id Input Devices Online

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

Install the device-specific driver (see Method 2).
Open Device Manager.
Right-click (or tap and hold) the name of the device, and then select Uninstall.
Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.

-->

Symptoms

Consider the following scenario:

You connect a Universal Serial Bus (USB) audio device, such as an audio adapter or USB digital-to-analog converter (DAC), to a Windows 10 Version 1703-based computer for the first time.
The operating system detects the device and loads the standard USB audio 2.0 driver (usbaudio2.sys).
Windows then downloads the device-specific driver from Windows Update.
The downloaded device driver replaces the usbaudio2.sys driver.

In this scenario, the device cannot be used, and the computer does not have sound. The speaker icon on the task bar is marked with an X mark. When you select the icon, you receive the following message:

Audio services not responding. Both the Windows Audio and the Windows Audio End Point Builder services must be running for audio to work correctly.

Cause

This 'audio not playing' problem occurs because the default USB audio 2.0 driver (usbaudio2.sys) uses the WaveRT port for operation but the device-specific driver does not. However, both drivers use the 'wave' reference string when the device interface is registered.When the device-specific driver replaces the default driver, the device interface that is created by usbaudio2.sys is still used because the reference strings overlap. Therefore, the operating system assumes that the new driver also supports the WaveRT port. Because the new driver does not support the WaveRT port, the system cannot access the driver.

Resolution

To fix this problem, use one of the following methods.